CMM-U305–J8

TECHNICAL SPECIFICATIONS:
-Working length(min) L: K/D sawn timber: 800MM, well 4 side planned timber: 400mm
-Timber length to be processed must be at least 50% longer than the timber width to be processed.
-Working width W = 50MM ~305MM
-Working thickness T = 25MM ~ 110MM
-Timber species – SOFTWOOD / HARDWOOD
-Timber moisture 8 ~ 12 %
-wood needs 90 degrees right angle, straight. Twisted, bended, curved timbers shall be cut off before finger jointing.

CAPACITY OF THE SHAPER (3000L)
7 TIMES/MIN
X 3000 MM AVERAGE INFEED LENGTH
21 M /MIN
X 480 MIN /SHIFT
X 0.7 RATE OF UTILIZATION = 7056M /SHIFT
CAPACITY OF THE SHAPER (6000L)
7 TIMES/MIN
X 6000 MM AVERAGE INFEED LENGTH**/1000MM
=42 M /MIN
X 480 MIN /SHIFT
X 0.7 RATE OF UTILIZATION =14112 M /SHI